RODE NTG-2

out of5based on0 customer ratings
(0 customer reviews)
RODE
  • Warranty: 1 year with free extension to 10 years following registration
  • Dimensions: 280.00mmH x 22.00mmW x 22.00mmD
  • Weight: 161 gm
  • Equivalent Noise Level: 18dB-A
  • Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Maximum Output Level: 6.9mV
  • Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1KΩ load)
  • Output Impedance: 250 Ω
  • Frequency Range: 20Hz - 20kHz (selected HPF @ 0)
  • Address Type: End
  • Capsule: 0.50"
  • Active Electronics: JFET impedance converter
  • Acoustic Principle: Line Gradient

ID: 6678

$269.00

The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.

  • Broadcast sound quality
  • Low noise circuitry
  • Condenser transducer
  • Rugged metal construction
  • Two step High Pass Filter (Flat/80Hz)
  • P48 phantom power or AA battery option
  • Low handling noise
  • Low weight - 161g (5.17 oz.)
  • Includes mic clip, wind shield and zip case
  • Ideal for professional applications within the film, video, television and production industries
  • 10 year extended warranty when you register online at www.rodemic.com/warranty


    ID: 6686 BRAND: RODE PART NUMBER: NTG2 Category:

    Technical Specifications

    Brand RODE
    Product Type Microphones
    Model NTG2
    Part Number NTG2
    Signal to Noise Ratio
    Nominal Impedence
    Warranty 1 year with free extension to 10 years following registration
    Dimensions 280.00mmH x 22.00mmW x 22.00mmD
    Weight 161 gm
    Equivalent Noise Level 18dB-A
    Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Maximum Output Level 6.9mV
    Maximum SPL 131dB SPL (@ 1kHz, 1% THD into 1KΩ load)
    Output Impedance 250 Ω
    Frequency Range 20Hz - 20kHz (selected HPF @ 0)
    Address Type End
    Capsule 0.50"
    Active Electronics JFET impedance converter
    Acoustic Principle Line Gradient

    Based on 0 reviews

    overall
    0
    0
    0
    0
    0
    Log in to leave a review